Licensed, Bonded & Insured AZ ROC #256351
24/7 Emergency Restoration Services

How To Clean Walls Before Painting Them

BOB VILA LOGO

Clean Walls Before Painting

Before painting, it’s crucial to clean walls properly so that they adhere to the paint.

This is especially important after you clean walls from water damage or soot.

Start by clearing the room of furniture and covering items with drop cloths.

This prevents paint splatters and keeps your workspace clean.

Remove wall plates, picture hangers, and any other fixtures.

This step ensures an unobstructed surface for painting. Next, inspect the walls for damage.

Look for cracks, holes, or peeling paint. Use a putty knife to scrape off loose paint and debris.

For holes and cracks, apply spackle with a putty knife, smoothing it over the damaged area.

Once the spackle dries, sand it with 120-grit sandpaper until it’s flush with the wall surface.

Lightly sand the entire wall to create a slightly rough texture.

This helps the new paint adhere better.

Dust off the walls using a vacuum or a dry cloth.

This removes any remaining particles that could affect the paint’s finish.

Thorough preparation ensures a smooth and clean surface, ready for painting.

Cleaning Walls Effectively

Cleaning the walls is an essential step before painting.

Prepare a cleaning solution using warm water, dishwashing liquid, and a small amount of vinegar.

The vinegar helps cut through grease and grime, providing a clean surface.

Use a sponge or cloth to wipe down the walls, starting from the top and working your way down.

This method prevents streaks and ensures thorough cleaning.

Avoid soaking the walls with too much water, as this can damage the surface and extend drying time.

Pay special attention to greasy or dirty spots, particularly in kitchens or high-traffic areas.

For tough grease stains, use a degreaser like Goo Gone.

If you have mold exposure, then you might want to contact a professionals before painting.

Apply the degreaser directly to the stain and scrub gently.

Once the walls are clean, rinse them with a cloth dipped in clean water.

This removes any soap residue that could interfere with paint adhesion.

Allow the walls to dry completely.

Proper drying is crucial to avoid moisture issues during painting.

Clean walls provide a solid foundation for the primer and paint, ensuring better adhesion and a smoother finish.

Final Preparations and Painting

After cleaning and drying the walls, perform a final inspection.

Check for any remaining rough patches or dust.

Sand any areas that need it and wipe away dust with a clean, dry cloth.

Now, you’re ready to start painting. Begin by applying a primer.

Primer seals the wall surface, covers imperfections, and provides a good base for the paint.

It enhances paint adhesion and ensures a uniform finish.

Apply the primer using a roller for large areas and a brush for edges and corners.

Let the primer dry completely.

Once the primer is dry, apply the paint. Start by cutting in the edges and corners with a brush.

This technique ensures neat lines and covers areas the roller can’t reach.

Use a roller for the main wall surfaces.

Apply the paint in even strokes, working in small sections to maintain a wet edge.

This prevents lap marks and ensures a smooth, consistent finish.

Depending on the paint type and color, you might need a second coat.

Let the first coat dry completely before applying the second.

Clean your tools immediately after use to prolong their life and keep them ready for future projects.

Proper wall preparation, cleaning, and careful painting result in a professional-looking finish that lasts.

Taking the time to do each step correctly ensures your painting project is successful and your walls look beautiful.

If your home has walls that need to be painted, contact our experts with ASAP Restoration for the best help today!